Wassup P25 brothers! I decided to give the P25 a little bit of a refresh. The aim was to lower the COG as much as possible for even better flight dynamics / performance and overall add a bit more refinement and features.

What I did was move the AIO under the carbon plate, put shorter stand offs, effectively reducing the original height by 12mm! (technically should still be able to fit O3 and moonlight 4k too)

Since the AIO is now mounted under the quad, I created a 3d printed PET-Carbon Fiber FC belly protector. Extended TPU feet tips prevent landing on the FC belly plate too hard. I also added a capacitor holder, integrated Flywoo standard buzzer holder in the dual antenna mount, and also increased the size of the nano rx / gps tray to make it easier to work on. The dual antenna mount has been adjusted a little bit for better antenna positioning with the stock DJI O4 Pro antenna. The front cage has also been reworked. Still can film up to 45 degree angle, and a M2x22 stand off is added for strength and vibration reduction. Rx holder bands can be installed on this stand off if you want to mount your ELRS RX antenna out front.

What’s it like to fly?
After multiple tests and tunes, even a few crashes, Nothing broke. I tested it with 3S, and she still flies really lovely but a tiny bit more cruisy. 4S is still INSANE and I love it. I also made a new tune with the latest betaflight to ensure you get the best out of this little quad.
She rips so hard, so SMOOTH…No jello, gyroflow works great. Top speed is still 120 km/h with a lightweight 4S battery like the GNB 720 Lihv 4S.. She made me fall in love again.. Probably my favourite quad to fly... So nimble and so agile! I hope you can experience it too!
Enjoy! ~PattyFlipz

Available Soon.

VTX: DJI O4 Air Unit Pro https://tinyurl.com/2wvs6e5t
FC: Speedybee 35A AIO F405 V2 https://tinyurl.com/yyyas42k
Motors: T-Motor F1404 Fpv Racing Drone Motor 4600kv
Lipo:
Pulsar Laser Speeds: GNB 720mAh 4S HV (4min+ flight time)
Cruising Speeds: Flywoo 4S 3000mah Li-ion Battery (15min+ flight time)
Go long or go home: Custom 3S RS50 5000mah Li-ion Battery (25min+ flight time)
Props: EMAX AVAN Rush 2.5x1.9x3 Propeller
GPS: GOKU GM10 Nano V3 GPS http://tinyurl.com/3d77e6h5
Receiver: TBS Nano Rx Pro with full size Immortal-T V2
Plates: T700 Carbon Fiber
Screws: Titanium
Prints: PET-CF, TPU95A, TPU60A
Buzzer: Flywoo standard buzzer https://tinyurl.com/3yerb2vc